This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our site and services and assist with our promotional and marketing efforts. You can read more about this in our Privacy Policy.
Transcend SATA III 6Gb/s SSD220Q 1TB
In Stock
14 available
- Transcend Internal SSD
- SSD220Q
- 1TB
- 2.5"
- SATA III 6Gb/s
Transcend's SATA III 6 Gb/s SSD220Q uses the latest QLC NAND technology, which employs a higher density of storage cells. By using high-quality flash memory and enhanced firmware algorithms, the SSD220Q delivers greater performance and reliability. Less is More Featuring QLC NAND Flash, SSD220Q's storage density per cell boosts 33%. More storage capacity is unleashed for more data. Your performance is no longer limited. Unlock your potential now! Performance Boost for Everyday Computing Taking full advantage of the SATA III 6 Gb/s interface and built-in SLC caching technology, Transcend's SSD220Q achieves exceptional transfer speeds of up to 550 MB/s read and 500 MB/s write. Guaranteed Endurance and Reliability Transcend's SSD220Q offers great terabytes written (TBW) values (up to 200 TBW) indicating the total amount of data you can write on the drive over its lifetime. RAID engine and LDPC coding Detects and corrects transfer errors to prevent data corruption. Garbage Collection Relocates existing data to release memory blocks. Wear-leveling Distributes data evenly across memory cells to prolong SSD's lifespan. DevSleep Intelligently shuts down SATA interface when not in use to prolong device's battery life A better choice than HDD Solid-state drives dominate the market for PC upgrades because they are faster and lighter than traditional hard disk drives. SSDs also consume less power, create less noise when in operation, and are more shock-resistant than hard drives. 3 easy steps to upgrade your PC Transcend's SSD220Q measures just 6.8 mm in height and features short access times, making it a perfect choice for upgrading desktops, laptops, and the latest gaming consoles in just three easy steps! SSD Scope software Transcend SSD Scope is advanced, user-friendly software that makes it easy to ensure your Transcend SSD remains healthy, and continues to run fast and error-free by determining the condition and optimizing the performance of your drive. Guaranteed quality Transcend’s solid state drives are built to the highest standards and rigorously tested, and offer outstanding quality, performance, and reliability.
SKU | TS1TSSD220Q |
---|---|
EAN | 0760557848912 |
Manufacturer | Transcend |
In Stock | Y |
Hard drive | |
---|---|
SSD capacity | 1000 GB |
Memory type | QLC 3D NAND |
Performance | |
Windows operating systems supported | Windows 10, Windows 7, Windows 8 |
Mac operating systems supported | No |
Linux operating systems supported | Kernel 2.6.31 |
Interface | Serial ATA III |
Low-density parity-check (LDPC) | Yes |
DevSlp (device sleep) support | Yes |
Active garbage collection | Yes |
TBW rating | 200 |
SSD capacity | 1000 GB |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
TRIM support | Yes |
RAID support | Yes |
Write speed | 500 MB/s |
Memory type | QLC 3D NAND |
Random write (4KB) | 59000 IOPS |
Random read (4KB) | 57000 IOPS |
Native Command Queuing (NCQ) | Yes |
Mean time between failures (MTBF) | 2000000 h |
Data transfer rate | 6 Gbit/s |
Compatible products | Microsoft Windows 7 Microsoft Windows 8 Microsoft Windows 10 Linux Kernel 2.6.31 or later |
Data transmission | |
Read speed | 550 MB/s |
Write speed | 500 MB/s |
Random write (4KB) | 59000 IOPS |
Random read (4KB) | 57000 IOPS |
Data transfer rate | 6 Gbit/s |
Endurance | |
Mean time between failures (MTBF) | 2000000 h |
Certificates | |
Certification | CE/FCC/BSMI/KC/RCM |
Design | |
Certification | CE/FCC/BSMI/KC/RCM |
SSD form factor | 2.5" |
System requirements | |
---|---|
Windows operating systems supported | Windows 10, Windows 7, Windows 8 |
Mac operating systems supported | No |
Linux operating systems supported | Kernel 2.6.31 |
Features | |
Interface | Serial ATA III |
Low-density parity-check (LDPC) | Yes |
DevSlp (device sleep) support | Yes |
Active garbage collection | Yes |
TBW rating | 200 |
SSD capacity | 1000 GB |
Windows operating systems supported | Windows 10, Windows 7, Windows 8 |
S.M.A.R.T. support | Yes |
Read speed | 550 MB/s |
TRIM support | Yes |
RAID support | Yes |
Write speed | 500 MB/s |
Mac operating systems supported | No |
Linux operating systems supported | Kernel 2.6.31 |
Memory type | QLC 3D NAND |
Random write (4KB) | 59000 IOPS |
Random read (4KB) | 57000 IOPS |
Native Command Queuing (NCQ) | Yes |
Mean time between failures (MTBF) | 2000000 h |
Data transfer rate | 6 Gbit/s |
Certification | CE/FCC/BSMI/KC/RCM |
SSD form factor | 2.5" |
Compatible products | Microsoft Windows 7 Microsoft Windows 8 Microsoft Windows 10 Linux Kernel 2.6.31 or later |
Harmonized System (HS) code | 84717070 |
Power | |
Operating voltage | 5 V |
Operational conditions | |
Operating temperature (T-T) | 0 - 70 °C |
Technical details | |
Interface | Serial ATA III |
S.M.A.R.T. support | Yes |
Operating temperature (T-T) | 0 - 70 °C |
TRIM support | Yes |
RAID support | Yes |
Native Command Queuing (NCQ) | Yes |
SSD form factor | 2.5" |
Software | |
Windows operating systems supported | Windows 10, Windows 7, Windows 8 |
Mac operating systems supported | No |
Linux operating systems supported | Kernel 2.6.31 |
Weight & dimensions | |
Width | 100 mm |
Weight | 45 g |
Height | 69.8 mm |
Depth | 6.8 mm |